Sears Craftsman 351.226151 Manual De Uso página 2

RightFax ii/14/2002 9:40 PAGE 3/33 RightF&x
Warranty .................................. 2
Safety Rules .............................. 2-3
Unpacking ................................. 3
Assembly ................................ 3-4
Installation ............................... 4-6
Operation ................................ 6-9
Maintenance ............................ 9-12
TroubLeshooting............................ 13
Parts Illustration and LIst .................. 14-19
EspeSol ............................... 20-31
FULL ONE YEAR WARRANTY
If this product fails due to a defect in materialor work-
manshipwithin one year from the date of purchase,
Sears will at its option repair or replace It free of
charge. Contactyour nearest Sears Service Center
(1-800-4-MY-HOME) to arrange for productrepair,or
return this produ_ to place of purchasefor replacement.
If thls productIs used for commercialor rental purpos-
es, this warrantywill applyfor 90 days from the date of
purchase.
This warranty applies only while this productIs used In
the United States.
This warrantygives you specificlegal rights and you may
also have otherrightswhich vary from state to state.
Sears, Roebuck and Co., Dept. 817WA, Hoffman
Estates, IL 60179
WARNING: For your own safety,read all of the rules
and precautions before operating tool.
CAUTION; Always follow proper operating procedures
as defined In this manual even Ifyou are familiar with
use of this or similartools, Remember that being care-
less for even a fractionof a secondcan resultIn severe
personalInjury.
BE PREPARED FOR JOB
• wear properapparel. Do not wear loose clothing,
gloves, neckties,rings, bracelets or otherJewelry
which may get caught in moving parts of machine.
• Wear protectivehair coveringto contain long hair.
• Wear safety shoeswith non-slip soles.
• Wear safety glasses complyingwith United States
ANSI 7.87.1. Everyday glasses have onlyImpact
resistantlenses.They are NOT safetyglasses.
• Wear face mask or dust mask if operation Is dusty.
• Be alert and think clearly. Never operate powertools
when tired, Intoxicated or when taking medications
that cause drowsiness.
© Sears, Roebud_ and Co.
2
PREPARE WORK AREA FOR JOB
• Keep work area clean. Clutteredwork areas invite
accidents.
• Do not use powertools tn dangerous environments.
• Do not use powertools in damp or wet locations. Do
not expose powertools to rain.
• Work area shouldbe properlylighted.
• Proper electricalreceptacle shouldbe availablefor
tool Three prong plug shouldbe plugged directly
into properly grounded, three-prongreceptacle.
• Extensioncords shouldhave a groundingprongand
the three wires of the extensioncord shouldbe of
the correctgauge.
• Keep visitorsat a safe distancefrom work area.
• Keep childrenoutof workplace.Makeworkshopchild-
proof. Use padlocks,master switchas or remove switch
kays to preventany unintentional useof powertools.
TOOL SHOULD BE MAINTAINED
• Always unplugtool priorto Inspection.
• Consult manualfor specificmaintaining and adjust-
ing procedures,
• Keep tool lubricatedand clean for safest operation.
• Remove adjustingtools. Form habit of checkingto
see that adjustingtools are removed before switch-
ing machine on.
• Keep an parts In workingorder.Check to determine
that the guard or other parts will operate properly
and perform their intendedfunction,
• Check for damaged parts.Check for alignment of
movingparts, binding,breakage, mountingand any
other conditionthat may affect a toots operation.
• A guard or other part that is damaged shouldbe
properlyrepaired or replaced.Do not perform
makeshiftrepairs. (Use parts list providedto order
replacement parts.)
KNOW HOW TO USE TOOL
• Use right tool for job. Do not force tool or attachment
to do a Jobfor which it was not designed.
• Disconnecttool when changing blades.
• Avoidacoidentaistart-ul_ Make sure that the switch
Is In the OFF positionbeforepluggingin.
• Do not force tool, It will work most efficientlyat the
rate for which it was designed,
• Keep hands away from movingparts and cutting
surfaces.
• Never leavetool runningunattended.Turn the power
off end do not leave tool until it comes to a complete
stop,
• Do not overreach.Keep proper footing and balance.
• Never standon tool. Seriousinjurycouldoccuriftool is
tippedor if blade Is unintentionally c ontacted.
• Knowyour tool. Learn the tool'soperation,applica-
tion and specificlimitations,