Code Setup; Auto Code Search - Steren RM-500 Manual De Instrucciones

4. CODE SETUP

1. Press the "SELECT" key, the code on LCD will flash. Enter the 4 digit
code in turn. Each time you enter a digit, it would stop flashing. Once the
code is complete, the remote will confirm it automatically. You can use your
remote normally.
2. Find out the codes from the code table, there are many groups of each
brand. Please try the first group, if it does not operate your equipment, try
the second, and do it like this until the codes can operate your equipment.
3. Turn on the air conditioner and try other keys. If one does not work, try another code.

5. AUTO CODE SEARCH

C/F
0
3. Turn on the air conditioner and try other keys. If one does not work, repeat the procedure.
6
If you don't know the brand of your air conditioner or if it is not listed on the
table, follow these steps:
RESE
1. Aim the remote to your air conditioner, press and hold "SELECT" for
5 seconds. The remote will enter in auto search mode and the code will
change on the screen.
2. Wait until the air conditioner responds and press any key to confirm.
C/F
0
RESET