Maintenance; Troubleshooting; Safety Instructions - Extel WEVPMH 001 Instrucciones De Uso

14

MAINTENANCE

The warranty is void if the parts are dismantled. Clean the outside only with a soft and dry cloth. Before cleaning, disconnect
and switch off the video surveillance system.
CAUTION: Do not use any acid or alcohol based or other similar cleaning product or solvent. You may damage the ap-
pliance and the vapours are explosive and dangerous for your health.
Do not use any tool which can be voltage conductor (metallic brush, sharp tool...or other) for cleaning.
15

TROUBLESHOOTING

With this video surveillance system, you have bought a high technology and ready to use product.
All parts are supplied to use completely your kit.
Nevertheless if you encounter problems or dysfunctions, you can remedy these defects by reading the following table:
Failure Cause
The system does not turn on Power supply problem
- red led turned off Wiring problem
- green led turned off
No link between panel and monitors Wiring problem
...or a single monitor
One of the monitors does not ring, a «Do not disturb» mode
message «do not disturb» displays. active
Problem of video quality Settings
Sound too loud/soft on the panel or Settings
all the monitors
Sound too loud/soft on a single mo- Settings
nitor
The conversation, viewing times are Settings
too short/long
The strike control is to short Settings
The electric strike does not work Wiring problem
The presence of an add.
monitor monitor is not indicated
on the roadside panel
CFI EXTEL WEVPMH 001 - 03/2010 - V1
18GB
Solution
- Check the connection on 230VAC
- Check the position of the switch 3
- Check wiring of P- P+ wires
- Check wiring and specially RJ45 cords, if you have
mounted them
- Check the correct input is used on the distributor
- Check the monitor or all the monitors are pro-
perly paired Chap 6 and 7
Chapter 10 «mute function»
Check the position of the switch on the
distributor,Reminder: the switch must be in HI posi-
tion on the last distributor only
Chapter 8 -b menu #9008
Chapter 10 - settings monitor
C
timing
Check the connection. Caution, do not confuse ins-
tallation of a current-controlled strike with a current
cut-off controlled strike, chapter 5b
Chapter 11, parameterization to perform or chapter
9 «option management»
Problem of brightness or colour Settings
In prog. mode, impossible to type The code is already used
the selected code, an error message for maintenance
displays
GUARANTEE CONDITIONS:
This device is guaranteed for labour and parts in our premises.
The guarantee does not cover: the consumables (batteries, etc.) and the damages caused by: misuse,
improper installation, external intervention, deterioration by mechanical or electrical shock,
fall or atmospheric phenomenon.
The sales slip or the invoice is required as proof of purchase date.
If necessary, our technical website is at your disposal www.cfi-extel.com
HOTLINE :
Last version of the dowloadable manual in color on :
16

SAFETY INSTRUCTIONS

The damages caused by the non-compliance to the manual lead to the expiration of the warranty. We will not assume any
responsibility for the resulting damage!
We will not assume any responsibility concerning any damage, to the goods or people, caused by improper handling or by
non compliance with the safety instructions.
This product has been manufactured in compliance with safety instructions. In order to keep this status and ensuring the
best operation of the product, the user must respect the safety instructions and warnings contained in this manual.
The user of this system is responsible for checking whether the video surveillance is compliant with the law in force in the
country of use.
Informs the user about the presence of important instructions
concerning the use and the maintenance (repair) in the documenta-
CAUTION
tion supplied with the appliance.
Informs the user about the presence of "hazardous voltages" non-
represent a risk of electrocution for people.
This symbol indicates a risk of electric shock or a risk of short circuit
- You should only use this product within a voltage range between: 100-240 Volts and 50-60 hertz. Never intend to use this
product with a different voltage.
- Make sure all electrical connections of the system are compliant with instructions of use.
- In commercial establishments, make sure to respect the rules for preventing accidents with the electrical installations.
of electronic appliances.
-Respect the instructions of use of other appliances connected to the system. (video recorder, TV, PC for example)
- Please contact an experienced person in case of doubt concerning the mode of operation or the safety of the appliances.
- Never connect or disconnect the electrical appliances with wet hands.
- When installing this product, check the power supply cables are not liable to be damaged.
- Never replace the damaged electrical cables by yourself! In this case, remove them and contact an experienced person.
CFI EXTEL WEVPMH 001 - 03/2010 - V1
Chapter 10 - «settings monitor»
Select another code
0892-35-00-69 (0,337€ttc/min)
www.cfi-extel.com
19GB