Maxspect Gyre XF130 Manual Del Usuario página 17

Alternating Gyre Mode
5. Next, assign the
the same operation as in Constant Speed Mode.
6. For example, we will set the
illustrated in the following diagram.
7. Once the reverse water flow speed
button again to set the duration between each alternating flow.
8. The Indicator Lights 2-11 on the Control Dial will now start to light up
according to the alternating duration. Rotate the Control Dial to assign
the duration.
reverse water flow speed
reverse water flow speed
has been set, press the Setup Mode
Operating Instructions
with the Control Dial using
English
at 40% as
16