Cleaning And Maintenance - Deltaco SH-LS3M Manual Del Usuario

1. Connect the 6-pin connectors to the LED strips.
Cutting the LED strip
Cutting the LED strip is optional
1. Cut the LED strip.
2. Remove protection.
3. Connect the 6-pin connectors to the LED strips.
Reset
To reset the device, press and hold the button on
the controller for about 8 seconds.
Install and use
1. Download and install the app "DELTACO
SMART HOME" from Apple App Store or Google
Play Store on your mobile device.
2. Launch the app "DELTACO SMART HOME".
3. Create a new account or log in to your existing
account.
4. Tap "+" to add the device.
5. Choose category and then the type of product
from the list.
6. Connect the device to power.
7. If the LED strip does not flash: Reset the
device.
If the LED strip is flashing: Confirm in the app.
8. Confirm the Wi-Fi network and password.
9. Enter the device name.
The device name will be used by Amazon Alexa
and Google Home.
Add service to Google home
Add the device to google home.
Add the service "DELTACO SMART HOME".
Add device to Amazon Alexa
Use the menu "Skills & Games" and search for
"DELTACO SMART HOME". Enable the app and
login. Use "discover" to add the device.

Cleaning and maintenance

Do not use cleaning solvents or abrasives.
Do not clean the inside of the device.
Do not attempt to repair the device. If the device
does not operate correctly, replace it with a new
device.
Clean the outside of the device using a soft cloth.
Support
More product information can be found at
www.deltaco.eu.
Contact us by e-mail: [email protected].
EST
Täname teid Deltaco valimise eest!
See seade on mõeldud ainult sisetingimustes
kasutamiseks.
Ühendamine
Ühendage LED riba Wi-Fi kontrolleriga,
toiteadapter Wi-Fi kontrolleriga ja toiteadapter
vooluvõrku. LED riba tagaküljel on 3M liim.
Eemaldage kaitsematerjal ja kleepige riba
A N O R D I C B R A N D
5