LAVOR Pro GV EGON VAC Instrucciones Para El Uso página 41

TROUBLE
- After switching on, the no-
water pilot
light flashes and the applian-
ce is beeping
- The appliance is ready for
use but there
is no suction or no steam
- The steam-ready pilot light
is on but no
steam is coming out
- When working,
attachment falls off
- When working, the suction
power drops
- The suction power is to low
When working, the suction
power drops
- The suction motor is wor-
king but there is no suction
- The handgrip buttons do
not holdthe handle safely
- Malodorous smell from flex
tube or attachment
EN
CAUSE
-Low water level in the boi-
ler tank
- The quick connector of
the flex tube is not
fitted properly
- The steam safety lock (29)
is on
- The steam adjustment
knob (J) is in the
closed position
an -The attachment has not
been connected properly
- The attachment is clogged
- One of the filters is clog-
ged
- Wrong filter assembly
- Air bypass
- The float has come in ope-
ration
- Wrong assembly or posi-
tion of filter assembly(O)
-Wet dirt remnants in flex
tube or attachment
SOLUTION
- Fill the boiler tank with the recharging
automatic valve bottle
-Make sure that the quick connector (24)
is hooked properly into the socket
- Release the safety lock
- Turn the steam adjustment knob (J) to
open position
- Connect the attachment safely
- Check and clean the attachment
- Check and clean solids filter (R),
microfibre filter (P) or sponge filter (Q),
air filter (X) and carbon filter (Y)
- Make sure that the filter assembly (O) is
completely assembled with lower filter
cover (S) and solids filter (R)
- Make sure that the machine tank (M),
the filter assembly (O),
the flex tube (1) and the quick connector
(24) are positioned correctly
- Empty the machine tank
- Check the assembly, make sure that micro-
fibre or sponge filter are properly inserted
- Clean the parts according to "Maintenance"
in use instructions
19