Child-Proof Lock - Saivod STE84C Manual Del Usuario

Selecting a Programme and Operating Your Machine
"Ventilation":
- Illuminates when the programme ends.
C
Anti-creasing icon will light up at the end of the
programme if anti-creasing function is active.
5.14 Changing the programme after
the programme has started
You can use this feature to dry your laundry in a
different program after your machine has started to run.
For example;
Press and hold the "Start/Pause/Cancel" button for
about 3 seconds to "Cancel" the programme in order
to select "Extra Dry" programme instead of "Iron Dry"
programme. Select the "Extra Dry" program by rotating
the program knob. Press "Start/Pause/Cancel" button to
start the program.
C
If you select a new programme by turning the
programme selection knob while your machine
is running, then the current program is cancelled
and new programme information is displayed.
Dryer / User Manual
5.15 Adding/removing laundry in
standby mode
In order to add or take out laundry after the start-up of
the programme;
1. Press the "Start/Pause/Cancel" button to switch the
machine to "Pause" mode. Drying process will stop.
2. Open the door at Pause position and close it again
after adding or taking out laundry.
3. Press "Start/Pause/Cancel" button to start the
program.
C
Any laundry added after the drying process was
started may cause the already dried clothes in
the machine intermingle with wet clothes and the
result will be wet laundry after the drying process
is over.
C
Laundry may be added or taken out as much
as desired during a drying process, but as this
process will interrupt drying continuously, it will
extend the program duration and increase energy
consumption.
Therefore, it is recommended to add laundry
before the drying programme has started.
C
If you select a new programme by turning the
programme selection knob while your machine is
in standby, then the current program is cancelled
and new programme information is displayed

5.16 Child-proof lock

There is a child-proof lock to prevent any programme
interruption due to the pressing of button while the
programme is running. The loading door and all button
except the "On/Off" button on the panel are deactivated
when the child-proof lock is active.
In order to activate the child-proof lock, press on
the "audio warning" and "anti-creasing" buttons
simultaneously for 3 seconds.
To start a new programme after the programme is over
or to interrupt the programme, the child-proof lock
should be deactivated. Press the same buttons for 3
sec. again to deactivate the child-proof lock.
Lock symbol will appear on the screen when the child-
proof lock is activated.
21 / 80 EN