Latching The Cooling Device Lid; Setting The Temperature; Switching Off The Cooling Device; Using The Interior Light (Only Mcf60) - Mobicool MCF 32 AC/DC Instrucciones De Uso

MCF 32, MCF 40, MCF 60 AC/DC
6.6

Latching the cooling device lid

➤ Lift the latch (fig. 1 1, page 3) and close the lid.
➤ Release the latch.
✓ The latch audibly clicks in place and secures the cooling device lid.
6.7

Setting the temperature

➤ Press the "SET" button once.
➤ Use the "+" and "–" buttons to select the cooling temperature.
✓ The cooling temperature appears in the display for a few seconds. The dis-
play flashes several times and then the current temperature is displayed
again.
6.8

Switching off the cooling device

➤ Empty the cooling device.
➤ Switch the cooling device off.
➤ Pull out the connection cable.
If you do not want to use the cooling device for a longer period of time:
➤ Leave the lid slightly open. This prevents odour build-up.
6.9

Using the interior light (only MCF60)

➤ Ensure the display shows the actual temperature.
➤ Press the "–" button to switch the interior light on.
➤ Press the "–" button again to switch the interior light off.
✓ The black dot (fig. 2 8, page 3) in the upper left corner of the display indi-
cates whether the interior light is switched on or off.
I
NOTE
The interior light switches off automatically after 30 minutes.
EN
15