Care And Cleaning - HAEGER Expert Trim HC-WG3.011A Instrucciones De Uso

•
It is better to cut a little than too much. Begin with the maximum cutting length
position (12 mm).
•
We recommend that you make a note of the cutting level selected each time, so
that you can repeat the same hairstyle on other occasions if you wish.
C C
ARE AND LEANING
– It is essential to switch off the unit and remove the main adaptor from the wall
socket before cleaning and oiling.
– To avoid the risk of electric shock, the appliance must not be immersed in liquid
or even allowed to come into contact with liquid.
– Do not use abrasives or harsh cleaning solutions.
– If necessary, the housing may be wiped with a dry, lint-free cloth.
Trimming comb and trimming blade
– After each use, use the cleaning brush to remove the hair between
the trimming comb and the trimming blade.
1. Remove the comb attachment.
2. Press the shaving head towards the back and remove it.
3. Brush out the shaving head insert (it is the area behind the
shaving head when it has been removed).
4. Reinsert the shaving head by inserting the latch of the shaving
head into the groove of the casing.
5. Press the shaving head back into the casing, until it engages
audibly.
Oiling the cutting head
Oil the cutting blades from time to time if you use the trimmer regularly. Use non-
corroding oil, for example machine oil.
1. Remove the comb attachment used.
2. Apply one to two drops of oil between the cutting teeth.
3. Turn the clipper briefly on and then off again to distribute the oil
4. Remove any excess oil by wiping with a cloth.
Instructions manual
English
5