Trouble-Shooting; Accessories - Ardo CALYPSO Instrucciones De Uso

6. Troubleshooting / error indicator
In the event of an error, the LED display flashes green and orange alternately. There are three different error-displays:
Further possible errors when using the unit
• Weak or absent vacuum:
Disconnect the Pumpset from the unit. Partly close the connector opening (f) with a finger to test the suction.
How ever, be careful not to completely cover the opening. If suction is detectable, then the pump is working. Test
the Pumpset in accordance with the separate Operating Instructions (only use the original Ardo Pumpset).
• The pump is not working / no data on the display:
Check the mains supply; if the unit still does not work it is defective.
• In the event that one of these errors occurs, and is confirmed, the unit must be brought or sent back to the point
of sale. The unit must be checked out by trained service personnel, or by the manufacturer of the pump unit.

7. Accessories

Mains adapter 120 V / 60 Hz output 9 V 1.2 A UL
Regulated mains adapter 100-240 V 50/60 Hz, output 9 V 1.4 A Euro
Regulated mains adapter 100-240 V 50/60 Hz, output 9 V 1.4 A UK
Regulated mains adapter 100-240 V 50/60 Hz, output 9 V 1.4 A UL
Regulated mains adapter 100-240 V 50/60 Hz, output 9 V 1.4 A Australia
Regulated mains adapter 100-240 V 50/60 Hz, output 9 V 1.4 A China
UpgradeSet
Nursing-aids bag
Pumpset bag
Calypso bag
Cold bag - complete
Cooling element
Miscellaneous Pumpsets www.ardomedical.com
General error (time-out)
• Switch off the unit and re-start. If the error message appears again, the unit is
defective and cannot be repaired.
Voltage too low
• Weak batteries
• Incorrect or defective mains adapter
Voltage too high
• Incorrect or defective mains adapter
63.00.69
63.00.141
63.00.142
63.00.143
63.00.144
63.00.145
63.00.41
63.00.81
63.00.83
63.00.84
63.00.82
63.00.116
en
7