Cleaning And Maintenance - Stocker 308 Manual De Instrucciones

5
how to mount the electric thermal weed-killer
1. Wedge the arm support in the handle.
2. Connect the upper part of the pole with the lower part and secure them.
3. Wedge the weed-killer's body in the plastic cover.
4. Mount the conic nozzle.
1
4
6
Operation
Connect the appliance to a power socket (220-240 V alternating current) using an extension
cable. Switch the appliance on by pressing the ON/OFF switch. The full operating temperature
is reached after approx. 1 minute. To kill weeds, now place the cone nozzle onto the plant to be
treated for around 5-10 seconds at maximum temperature (600 ° C), depending on the type of
plant. For taller plants, first only heat the upper section of the plant briefly and then place the
cone nozzle against the shrunken plant for approx. 5-10 seconds.
48
Art. 308
Electric thermal weed-killer
Assembly
3
2
Usage
Art. 308
Electric thermal weed-killer
Usage
Notes
This appliance is particularly suitable for removing weeds.
Weedkilling is most effective at an early stage of vegetation growth, the younger the plant, the
more effective the treatment.
The most suitable time is during spring. The success of the operation is not immediately visible.
Even though the plants may still look unharmed after the treatment, they will dry up within a
few days. The heat acts on the roots of the plant, killing it permanently. The visible section of the
plant can also be burnt off with a longer exposure time/treatment, but burning the plants off
completely is not essential. Older plants with hard leaves such as thistles must be treated more
frequently at an interval of between 1 and 2 weeks in order to make them dry out. To begin with,
overgrown areas must be treated several times at short intervals in order to produce long-term
success. After this, treatment at longer intervals is sufficient. Repeated treatment of certain
types of weed may be necessary.
Shutting down
1. Before turning off the device, it must be cooled first. Select temperature setting 50 °C for at
least one minute. Then switch it with the ON/OFF switch.
2. Always place the appliance back on its metal kickstand after use on a level, fireproof
underlay until the hot components have cooled down.

Cleaning and maintenance

1. Let the device cool down before storage.
2. If necessary, wipe the device with a dry, lint-free cloth or a brush.
For further information about the product, please contact [email protected]
Sign up to our newsletter and keep up to date with our latest news: www.stockergarden.com/newsletter
6
7
49