Nevir NVR-9505 CVT Manual De Instrucciones página 12

OPERATION OF THE HEATER
NOTE: It is normal when the heaters are turned on for the first
time or when they are turned on after having not been used for
a long period of time the heaters may emit some smell and
fumes. This will disappear when the heater has been on a short
while.
Convector heater with thermostat NVR-9505 CVT
Choose a suitable location for the heater, taking into account
the safety instructions above.
Insert the plug of the heater into a suitable socket.
Turn the thermostat knob fully in a clockwise direction to the
maximum setting.
Turn on the heating elements by means of the rocker switches
on the side panel. When the heating elements are "on" the
switches will illuminate. For maximum heat output both
switches should be on.
When the desired room temperature has been reached, the
thermostat knob should be turned slowly anti-clockwise until the
thermostat is heard to click off and the lights on the element
switches are seen to go out. After this the heater will keep the
air temperature in the room at the set temperature by switching
on and off automatically.