Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Convector heater with thermostat and fan NVR-9506 CVT
All the above instructions for model NVR-9505 CVT (above) also
apply to model NVR-9506 CVT.
Model NVR-9506 CVT also incorporates an internal fan, which
can be switched on independently of the heating elements.
Fan Operation: This is operated by means of the switch with the
fan symbol along the side of it. The fan will only operate with
the thermostat in the "on" position and can be used when the
heating elements are "on" to blow warm air into the room. In
warm conditions the fan can be used with the heating
elements "off" to blow cool air into the room.
CLEANING THE HEATER
Always un-plug the heater from the wall socket and allow it to
cool down before cleaning.
Clean the outside of the heater by wiping with a damp cloth
and buff with a dry cloth.
Do not use any detergents or abrasives and do not allow any
water to enter the heater.
Tabla de contenido
