SOLAC espression CA 4805 Instrucciones De Uso página 43

4. Prepare the lime scale removal solution as indicated on
the sachet containing the removal agent supplied by
Solac. Pour the content into the water tank and add
water up to the lime scale removal mark on the tank.
5. Owing to the lengthiness of this process, you need to
confirm that you want to carry it out at that time. Before
confirming, make sure you have poured the removal
agent into the water tank.
a) to confirm that you are going to carry out the decalcifica-
tion process, press the selector for 1 or 2 coffee cups.
b) to abort the process, press the steam button.
IMPORTANT! If you have poured the removal agent into
the water tank, remove it to make sure you do not use it by
mistake to prepare a coffee.
N.B. if you exit the lime scale removal process once it has
begun, the programme will continue with the rinse cycle,
(from step 11). This will prevent traces of the removal
agent remaining inside the appliance.
During the decalcification process, the decalcification
icon will blink.
6. When the bar is fully lit up, the decalcification process
will be complete.
7. After completing the decalcification process, the system must
be rinsed to eliminate all remains of the decalcification agent.
8. The coffee machine will inform you of the following:
- Need to fill in the water tank with clean water, while
the orange "low water" icon is lit.
- Need to empty the drip tray, while the red ERROR icon is lit.
9. Empty the remains of the deposit and fill it with clean
water. Empty the drip tray. When carrying out these
operations, press the coffee extraction selectors to con-
tinue the process.
13