Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Viewing Picture-in-Picture
This product has one built-in tuner, which does not altow PIP to function in the same mode. For example, you cannot watch one TV
channel in the main screen, and a different one in the PIP screen. Please see 'PIP Settings'below for detaiteds. You can use the
PtP feature to simultaneously watch two video sources. (See page 38 to select the PtP picture sound.)
>" While V-Chip (See page 56) is in operation, the PiP function cannot be used.
>" While xvYCC (See page 27) is in operation, the PtP function cannot be used.
Activatincz
Picture-in-Picture
1,
Press the MENU button to display the menu.
Press the A. or • buttons to select "Setup", then press the ENTER button.
Press the A or _' buttons to select "PtP", then press the ENTER button.
2=
Press the ENTER button again.
Press the& or _' buttons to select "On", then press the ENTER button.
>" If you turn the TV off while watching in PtP mode and turn it on again, the PtP
window wilt disappear.
>-You can view Analog TV broadcasts on the PIP screen (sub-picture) when the
main picture is from an external device connected to HDMtl,2,3,
Component1,2, or PC
Main picture
Sub picture
Component 1,2
HDMt 1,2,3
Analog TV broadcasts only
PC
(_i
Alternately,
you can press
the PIP button
on the remote
control
repeatedly
to activate
or
deactivate
the PIP.
FAV.C_
CAPTION
p_
CZCJ
I
II
SLEP
_,
_
MT8
C_I
Chanc_the
PiP Channel
3,
Press the A. or T buttons to select "Channel", then press the ENTER button.
Press the & or _r buttons to select the desired channel in the PtP window.
Press the ENTER buttons.
>" MAIN: PC / HDMt 1,2,3 / Component 1,2
PiP: TV(Analog)
>" The channet can be active when the sub picture is set to TV.
!_}
Press the PIP Channel buttons on the remote control
Tabla de contenido
