• Do not modify the device in
EN
any way. Have repairs to the
device or the power supply unit
performed only by an autho
rized repair shop or service
centre.
• Place the device only on a
solid, level, and moistureresis
tant surface.
• Do not cover the device parti
cularly the ventilation ope
nings.
• It cannot be completely exclu
ded that some varnishes, plas
tics, or furniture care products
may deteriorate and soften the
material of the nonslip feet.
Therefore please place a non
slip pad underneath the device
if required.
• Do not place the device directly
underneath a shelf or a wall
unit; the water vapour could
damage such.
• Aromas containing oil (e.g.
eucalyptus oil) must not be
used as these may damage the
device. Use only watersoluble
aromas.
• Do not transport the device
with a filled water tank.
• Do not operate the device if it
contains very little or no liquid.
6
A. Start-up Operation
Fill the device only while the
power supply unit is disconnec
ted!
1. Remove the upper part.
2. Fill with distilled water up to
the maximum water level indi
cator (80 ml).
3. Add 1 to 2 drops SOEHNLE
fragrance oil. Reattach upper
part correctly.
4. Connect power supply unit.
5. Place on a level surface.
6. Switch on.
Illumination
After switching the device on it
will be illuminated in alternating
colors. Push again to stop at the
current color. Push again to
switch illumination off.
Push again to switch device off.
B. Cleaning
For reasons of hygiene the device
must be cleaned after each filling
at least every three days. Before
cleaning, dis connect the unit
from the mains.