Operation; Short Overview And Front Panel Pad - Protec ECOMAX Manual De Instrucciones

Operation

Operation

Short Overview and Front Panel Pad

Functions
• Feeding film
Before feeding the next film wait until the LED stops
flashing, but is continuously on. An acoustic signal
additionally indicates that the next film can be
inserted.
• Power (ready to operate)
The LED is on as long as the unit is on.
• Warming up
During warm-up the LED flashes; before feeding the
next film wait until the LED stops flashing, but is con-
tinuously on. The end of the warm-up phase is indi-
cated by an acoustic signal. If you try to insert a film
during warm-up, an interval sound will occur perma-
nently.
• Bath heating failure
If the developer temperature is not reached within 30
minutes, the LED starts flashing rapidly and an inter-
val sound occurs permanently.
Important!
Safety function stops film transportation when cover is re-
moved. Therefore keep cover placed on the machine when
processing films.
16
LED
Symbol for film feed released
Symbol for film feed locked
ECOMAX
TM