Important Notes; Applications; Conformity And Approval; Operation - Monacor JTS UF-10TH/12 Manual De Instrucciones

2 Important Notes

The wireless microphone corresponds to all rele-
vant directives of the EU and is therefore marked
with .
G
The microphone is suitable for indoor use only.
Protect it against dripping water and splash
water, high air humidity and heat (admissible
ambient temperature range: 0 – 40 °C).
G
For cleaning only use a dry, soft cloth; never use
water or chemicals.
G
No guarantee claims for the microphone and no
liability for any resulting personal damage or
material damage will be accepted if the micro-
phone is used for other purposes than originally
intended, if it is not correctly operated, or if it is
not repaired in an expert way.
If the microphone is to be put out of opera-
tion definitively, take it to a local recycling
plant for a disposal which is not harmful to
the environment.

3 Applications

Combined with the receiver UF-10R /12, this
dynamic hand-held microphone with integrated
UHF transmitter creates a wireless audio transmis-
sion system. The microphone is supplied with a
microphone case, a microphone holder and push-
on ID caps in various colours to identify the micro-
phone.
Operation of the audio transmission system via
the REMOSET function is most convenient: Simply
press a button and, via a 2.4 GHz radio signal, the
microphone is matched to the transmission fre-
quency selected on the receiver.

3.1 Conformity and approval

Herewith, MONACOR INTERNATIONAL declare
that the wireless microphone UF-10TH /12 is in ac -
cordance with the basic requirements and the other
relevant regulations of the directive 1999 / 5 / EC.
The declaration of conformity can be found on the
Internet:
www.jts-germany.de or www.monacor.com
This wireless microphone may be operated in the
following countries:
DE
In the Federal Republic of Germany, the wireless
microphone UF-10TH /12 requires a frequency
assignment (for which a fee is charged).
In other countries, it is necessary to apply for a cor-
responding approval. Prior to operating the system
outside Germany, please contact the MONACOR
subsidiary or the corresponding authorities of the
respective country. Links to the national authorities
can be found via the following Internet address:
www.cept.org
→ ECC
→ Topics
→ Short Range Devices (SRD) and other R&T TE
sub-classes
→ EFIS and National Frequency Tables

4 Operation

4.1 Inserting / Replacing the batteries

For power supply, two 1.5 V batteries of size AA are
required.
G
Only insert batteries of the same type and always
replace both of them.
G
If the microphone is not in use for a longer period
of time, always remove the batteries to prevent
damage due to battery leakage.
Never put used batteries in the household
waste; always take them to a special
waste disposal, e. g. collection container at
your retailer.
1) Unscrew the sleeve (6) on the lower end of the
microphone.
2) Slide down and fold up the latch (8) holding the
batteries.
3) Insert the batteries with the positive and nega-
tive poles as indicated in the battery compart-
ment.
4) Fold back and slide up the latch to lock it.
5) Screw the sleeve on the microphone again.
11