Fora Diamond CUFF BP Manual Del Propietário página 8

After the measurement, the monitor displays the systolic
pressure, diastolic pressure and pulse rate.
3. Press the Power button to turn the device off.
Note:
• If the device is left idle for 3 minutes, it will turn off automatically.
B. Average Measurement (via APP)
Automatically performs three (3) consecutive blood pressure
measurements and displays the average result in the end.
This function is only available when your Diamond CUFF BP is
connected to your mobile device.
1. Press the Bluetooth button. The "
display, indicating that the device is ready to transmit data.
Important!
Be sure the device is properly connected to your mobile
device via Bluetooth.
" icon will appear on the
EN-6
2. Launch iFORA BP app. The main screen appears on the
mobile device's screen.
3. Set Average Mode to ON and tap
cuff will begin to inflate automatically.
4. After the first measurement is complete, the device and
iFORA BP app will start counting down before the second
measurement begins. The device will take three (3)
measurements consecutively with an interval of 20 seconds.
Note:
. Then the