Technical Specifications; Safety Rules For Hot Air Guns - RS Components 778-1879 Instrucciones De Uso

Technical specifications

Model
▪ Power input
▪ Voltage
▪ Air flow
▪ Air temperature at nozzle
▪ Sound pressure level (EN 60745-1)
▪ Sound power level (EN 60745-1)
▪ Weight
▪ Safety class (EN 60335-1)

Safety rules for hot air guns

WARNING! Read all safety warnings and
all instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
WARNING: (For UK, Ireland, Cyprus or Malta
only):
Your RS power tool is supplied with a cable, which is
fitted with a standard CEE 7/16" Euro plug. In order
for you to safely use this power tool in the UK, Ireland,
Cyprus or Malta, you will need to fit the enclosed
converter plug. Not using the supplied converter plug
may invalidate the warranty.
The converter plug encapsulates an Euro plug, giving
a permanent/semi-permanent conversion to a British
plug. Please see instructions (Fig. 9) at the front of the
manual before fitting this converter plug.
▪ Place the adapter plug flat side down on the work
surface, using the correct screwdriver (either flat head
or Philips) unscrew the central retaining screw. Turn
over the adapter plug and carefully lift the cover of the
plug to reveal the inside of the adapter.
▪ Insert the 2 pin CEE 7/16 Euro plug into the retaining
clips of the adapter plug as shown on Fig. 9 and
carefully close the cover of the adapter plug. Turn the
plug over, to reveal again the central retaining screw
and carefully tighten the screw, making sure the two
sides of the adapter plug fit together.
▪ Your adapter plug is now complete and is ready to
use in a BS 1363 electric socket as shown. Please
note you should never remove and type of plug from a
Original instructions
RS-778-18XX-pages-HAG 2000[ED] - NEW.indd 3
778-1879 778-1866
1600 W 2000 W
110 V
I: 280 l/min 350 l/min
II: 280 l/min 350 l/min
III: 480 l/min 500 l/min
І: 40ºС
II: 300ºС
ІІI: 500ºС
61 dB (A) 61 dB (A)
72 dB (A) 72 dB (A)
0.76 kg 0.76 kg
II
socket by pulling the cable, you should always remove
by gripping the plug itself.
▪ Fully unwind cable drum extensions to avoid potential
overheating.
▪ When an extension cable is required, you must ensure
that it has the right ampere rating for your appliance
and it is in safe electrical condition.
▪ Always switch off the appliance before to placing it
down.
WARNING: Before connecting the machine
to a power source ensure that the voltage supply is
the same as that specified on the nameplate of the
appliance.
▪ A power source with a voltage greater than that
specified for the tool can result in serious injury to the
user, as well as damage to the tool.
▪ If in doubt, do not plug in the tool.
▪ Using a power source with a voltage less than the
nameplate rating is harmful to the motor.
▪ The tool must be used only for its prescribed purpose.
Any use other than those mentioned in this Manual
will be considered a case of misuse. The user and not
the manufacturer shall be liable for any damage or
injury resulting from such cases of misuse.
▪ Wear protective gloves and safety glasses.
▪ Do not touch the air outlet or nozzle and the heated
object; they become extremely hot.
▪ During application the heat nozzle must be kept at
least above 50mm away from the workpiece to allow
air flow.
▪ Do not point the hot air flow for a long period at one
spot.
▪ Never direct the hot air towards your face.
▪ Never direct the hot air towards persons or animals.
▪ Never use the appliance for drying hair or clothing.
778-1860
2000 W
240 V 240 V
300 l/min
300 l/min
500 l/min
60ºС 50ºС
350ºС
70-600ºС ±10%
550ºС
61 dB (A)
72 dB (A)
0.76 kg
II II
3
30.9.2013 . 14:54:25 .
EN