Koenic KAF 2110 B Manual De Instrucciones página 17

Installation
Fig. Place the product on an even, solid and
1
heat resistant surface. Consider the
distance to the next socket outlet.
Note:
To ensure sufficient air circulation follow
minimum clearances as given below:
Sides: 10 cm
Back: 30 cm
Up: 30 cm
Warning
The product must not be placed into
furniture. The product must not be placed
directly below a plate, cupboard or cabinet.
Operation
Pull the frying pan out of the appliance
Fig.
2
using the handle.
Remove the transport rubbers from the
Fig.
3
frying grate and put the frying grate
into the frying pan.
Warning
Be sure to remove the transport rubbers
from the frying grate. Failure to remove the
protective rubbers before usage might result
in fire and damage to the equipment.
Fill the food to be fried in the frying
Fig.
4
pan, but at maximum up to the
Put the frying pan back into the
Fig.
5
appliance. Make sure it fits correctly.
Plug the mains plug into a suitable
Fig.
6
socket.
IM_KAF2110B_180730_V05_HR.indb 17
Press the on/off button to turn on
Fig.
7
the device. Set the temperature and
time individually with the +/- buttons.
Please observe the symbols at the top
of the product as well as the following
table. The temperature and time or the
remaining time are displayed alternately
in the display. Press the on/off button
again briefly to start the process.
The operation indicator lamp and the
heating indicator light illuminate.
The set temperature is reached after
approx. 2 to 3 minutes. When the
preset temperature has been reached,
the heating indicator light turns off.
During subsequent heat-up processes,
the heating indicator light switches on
again and again. When the time is up,
a beep sounds repeatedly and the unit
turns itself off. To turn off the hot air
fryer manually, press the on/off button.
Fig. To remove the fried food, pull the frying
8
pan out of the appliance by the handle.
Place the frying pan on a flat and heat-
resistant surface.
Put the fried food in a suitable bowl or
Fig.
9
on a plate. If necessary, use a wooden
spatula to empty the frying pan.
When all parts have cooled down,
clean the device as described under
Cleaning and Care.
Note:
• The fat that leaked from the foods during
the frying process will gather below the
frying grate. Use a wooden spatula to
remove the prepared foods, in order to
.
avoid that this fat is poured on top of the
foods.
• The heating indicator light will turn itself
on and off during the frying process. This is
a normal occurrence and indicates that the
set temperature is being kept.
English
17
30/7/18 3:17 pm