Temperature Selection - Domo DO601ED Manual De Instrucciones

DO601ED - DO602ED
BEFORE FIRST USE
• Before using the blanket for the first time, you need to do the following : unwrap
the blanket carefully and remove all packaging materials. Keep the packaging
(plastic bags and carton) away from children. Check the blanket after unpacking on
visual damage, possibly caused by transport.
• never use the blanket when it is folded, wrinkled or tucked in.
• don't place any artificial heat sources, heavy and/or sharp objects on the electrical
blanket.
• the electrical blanket has an overheating protection. this protection prevents the
overheating of the blanket over the whole surface, by cutting the power when a
malfunction occurs.
• keep in mind that the blanket cannot be used anymore after this and needs to be
returned to your vendor.
USE OF THE ELECTRICAL BLANKET
Spread out the electrical blanket evenly over your mattres, starting at the foot of your
bed.
• the electrical blanket cannot be folded, tucked in or laid around the mattress.
• now place the sheets on the bed, like you normally do. this way the electrical
blanket is situated between the mattres and the sheets.
• always make sure the electrical blanket is straight and doesn't get wrinkled up
or gets folded during use, especially when you have an adjustable bed or a mattres
which consists of more than one part. Make sure to check the blanket when you make
up your bed, the electrical blanket can only be used when it is laid out flat.
• We recommend to turn on the electrical blanket 90 minutes before going to bed
and to cover the blanket with your quilt or with the covers, to prevent the heat from
escaping.

TEMPERATURE SELECTION

The quickest way to heat up the blanket is to select the highest temperature setting.
If you need less warmth afterwards you can lower the temperature setting. When the
electrical blanket is turned on the led light inside the switch will light up.
Temperature settings :
0 = off
1 = minimal heat
2 = medium heat
3 = maximum heat