Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Section 10: Specifications
This section contains important information regarding the
performance and construction of this product. Pease read and be
familiar with this and all information contained in this instruction manual.
10.1: Mandatory Disclosures
This instruction manual addresses foreseeable hazards, uses and
applications. If you have questions about your application that are not
addressed in this document, contact FallTech for additional guidance.
It is the responsibility of the employer/issuer of this equipment to
ensure that it is used in a manner consistent with these instructions.
Failure to do so could result in series injury or death. For further reading
and additional information, see Section 10.4 for a listing of relevant
standards with which you should be familiar.
10.2: Performance Specifications
FallTech Web Retractors
Model #s: 7262, 72624, 7263, 8262
Component
Housing
Alloy Steel
Drum
ABS Plastic
Main Shaft
Alloy Steel
Pawls/Ratchet
Alloy Steel
Webbing
Polyester
Attachment Connector(s)
Chro-Moly Alloy Steel
* When tested in accordance with ANSI Z359.1-2007
FallTech Web SRL's
Model #s: 7270WR, 7271WR
Component
Housing
Alloy Steel
Drum
ABS Plastic
Main Shaft
Alloy Steel
Pawls/Ratchet
Alloy Steel
Webbing
Polyester
Attachment Connector(s)
Chro-Moly Alloy Steel
* When tested in accordance with ANSI Z359.1-2007
Material
Rating
3,600 lbs
n/a
3,400 lbs
n/a
5,000 lbs
5,000 lbs
Overall static strength:
> 3,000 lbs
* Arrest Forces:
< 900 lbs
* Deceleration Distance:
< 24"
Maximum Capacity:
310 lbs
Material
Rating
3,000 lbs
n/a
3,000 lbs
n/a
5,000 lbs
5,000 lbs
Overall static strength:
> 3,000 lbs
* Arrest Forces:
< 900 lbs
* Deceleration Distance:
< 24"
Maximum Capacity:
310 lbs
29
FallTech Web SRL's
Model #s: 7270KV
Component
Housing
Alloy Steel
Drum
Alloy Steel
Main Shaft
Alloy Steel
Pawls/Ratchet
Alloy Steel
Webbing
Kevlar®
Attachment Connector(s)
Chro-Moly Alloy Steel
* When tested in accordance with ANSI Z359.1-2007
FallTech Contractor Web SRL's
Model #s: 7276WR
Component
Housing
Nylon 6/6 over Alloy Steel
Drum
Aluminum
Main Shaft
Alloy Steel
Pawls/Ratchet
Alloy Steel
Webbing
Dyneema®
Attachment Connector(s)
Chro-Moly Alloy Steel
* When tested in accordance with ANSI Z359.1-2007
10.3: Labels and Markings
The labels shown below must be present on the product and must be
legible. If labels are not present and legible, remove the product from
service.
Material
Rating
3,000 lbs
n/a
3,000 lbs
n/a
5,000 lbs
5,000 lbs
Overall static strength:
> 3,000 lbs
* Arrest Forces:
< 900 lbs
* Deceleration Distance:
< 24"
Maximum Capacity:
310 lbs
Material
Rating
3,000 lbs
n/a
3,000 lbs
n/a
4,500 lbs
5,000 lbs
Overall static strength:
> 3,000 lbs
* Arrest Forces:
< 900 lbs
* Deceleration Distance:
< 24"
Maximum Capacity:
310 lbs
30
Tabla de contenido
