Gira 0315 Serie Instrucciones De Montaje Y Funcionamiento página 24

Keep to the following order when install-
ing:
1. Connect the (230 V) supply voltage to
the clamps L/N of the power unit.
GB
Ill. 3: Power unit (grey base element)
2. If required, connect the 230 V auxiliary
input (1). See Page 26.
3. Feed the connector cable through the
second wall socket.
4. Fit the power unit into the wall socket.
5. Attach the connector cable to the radio
base element. The earth connection (PE)
can now be connected to clamp X.
Ill. 4: Radio base element (black base element)
24
N 1 L
a X b