Adjust The Cutting Blades; Cutting Techniques - Oregon Professional Serie Manual De Instrucciones

Adjust the Cutting Blades

WARNING:
To reduce risk of injury,
disconnect the battery from the power tool
before making any adjustments, changing
accessories, or transporting.
The angle of the cutting blades can be
adjusted into 13 possible working positions
between 0° and 135°.
Steps for adjusting the angle of the cutting
blades:
CAUTION:
To reduce risk of injury,
install guard over blades while performing
adjustment.
• Pull back on the pin (4).
• Use lever (5) to adjust the joint by one or
several holes.
• Release pin and ensure it engages a hole in
the plate (6)
135°
16
Operation

Cutting Techniques

OVERHEAD TRIMMING
Hold the hedge trimmer vertically with both
hands and move it across the material
overhead can cause fatigue. To minimize
risk of accidents, plan overhead cuts
beforehand and keep overhead cutting time
to a minimum.
• Use head protection when operating the
extended-reach hedge trimmer overhead
HORIZONTAL TRIMMING
Angle the trimming head if necessary Hold the
trimming bar at a 0° to 10° angle while moving
the hedge trimmer horizontally in an arc to
6
5
sweep cuttings to the ground
4
VERTICAL TRIMMING
Angle the trimming head if necessary and
move the hedge trimmer vertically in an arc
WARNING:
Trimming material
Hedge Trimmer Model EHT120VX-NA