Operation; Intended Use; Before Starting Work; Batteries And Battery Charging - Oregon Professional Serie Manual De Instrucciones

Operation

Intended Use

Use your blower only for clearing yards,
gardens, grounds, and facility areas of loose
debris, such as leaves, grass, paper, and dust
Do not use it for other purposes, as misuse
may result in personal injury or property
damage, including damage to the machine

Before Starting Work

Read the Original Instruction
Manual for the battery carefully
before assembling, operating or
servicing the product.
• Check the battery is in good condition free
from any broken, missing or cracked parts
• Check the blower for misalignment or
bending of moving parts, breakage of parts
and any other condition that may affect the
power tool's operation
• Check that the elbow and nozzle are properly
installed
• Check the condition of the shoulder straps
and waist harness
• Make sure the battery cable, plug and power
socket are not frayed or damaged
To repair or replace any damage or worn
part, contact Oregon or an authorized Oregon
servicing dealer

Batteries and Battery Charging

• Batteries must be used, stored and charged
within battery use, storage, charging temperature
ranges outlined in the Specifications section of
this manual
• Oregon 120V Professional Series tools are
intended for use only with Oregon 120V
Professional Batteries Read and follow all
instructions provided in the Oregon 120V
Professional Battery Operators Manual
Backpack Blower Model BL120VX-NA
Operation
• Oregon 120V Professional Batteries must be
charged only by Oregon 120V Professional
Charger Read and follow all instructions provided
in the Oregon 120V Professional Charger
Operators Manual

Starting the Backpack Blower

• Insert the Oregon Professional Battery fully
into the battery pocket of the blower until it
presses down on the battery eject springs and
the battery release lever engages securely
• Ensure the trigger-lock lever is in the "OFF"
position The blower will not function if the
lever is in the "ON" position when the battery
is initially plugged in If necessary, unplug
the battery, place the trigger-lock lever in the
"OFF" position and plug in the battery
• Insert the plug of the battery cable into
the DC battery socket—make certain the
battery plug is completely seated into the
battery socket When fully inserted the LED
lights on the dashboard will activate and be
accompanied by an audible beep
WARNING:
straps and belt to suit your size before starting
work
• The blower is designed for single-handed
operation with the right hand on the control
handle It should be carried as a backpack
with the straps over both shoulders, the waist
belt affixed just above the hips and the chest
strap latching the two shoulder straps
Adjust carrying harness
13