System-Password Setup:
The default password is 111111. All numbers, letters
and characters in the table can be used as password.
Press the "Select" button to input the value, navigate
to "Enter" and press the "Select" button to input the
current password.
Remote Control Buttons:
CH1=Up / CH2=Down / CH3=Left / CH4=Right.
Same operation to input the new password and confirming the password.
After changing the password the message "Password changed" will be displayed.
If changing the password fails the message "Mismatch password" will be displayed.
System-Clear Account Info:
Set to ON to clear the account information after logging out.
Set to OFF to save the account information after logging out.
System-Logout:
Set "Logout" to 1~10 (in minutes) or Off to logout automatically if idle for this period.
System-Keypad Tone:
Set to ON or OFF to enable or disable the keypad tone function.
System-Time Set:
Adjust the current time, date and year at any time.
Set the current time for the video back-up data to be
played without time shifting. The setting options include
three date formats as follows:
YYYY/MM/DD (2009/06/13 - year/month/day).
MM/DD/YYYY (06/13/2009 - month/day/year).
DD/MM/YYYY (13/06/2009 - day/month/year).
Time format as shown below:
01:00:00 - hour:minute:second
Navigate using the "UP" and "DOWN" buttons on the remote control and press the "Select" button to
change the numeric value. Press the "MENU" button after the time setting is completed. Press the
"DOWN" button and the "Select" button to apply the new time setting. Alternatively navigate with the
mouse up and down, click to change the numeric value. Right-click to return after the time setting is
completed. Click on "Apply" to apply the new time setting.
System-Event List:
The event list function enables playback by event. In the Event list menu all previously recorded
videos, start time and end time as well as recording year/date/time are displayed. The HDD can store
up to 300 events. If there are more than 300 events play the previous events according to input time if
the data has not been overwritten.
9