Klarstein Mega Jerky Manual Del Usuario página 26

EN
26
Operation
1. Cut food (e.g. fruit) into 5 to 8 mm thick slices and place the slices on the grids.
2. Slide the wire grilles into the appliance.
3. Connect the automatic dehydrator. You will hear a beep and the screen will light up
for 1 second.
4. Select the temperature by pressing the arrow keys on the control panel. The
temperature changes from 35 °C to 80 °C in 1 °C increments. Press and hold the
arrow key to quickly change the temperature.
5. Set the time by pressing the arrow keys on the control panel. The timer can be set in
30 minute increments between 30 minutes and 24 hours. To set the timer quickly,
press and hold the arrow key.
6. After you have set the temperature and timer, press the power button to start the
dryer.
7. Once the drying process is complete, you will hear 4 beeps. The machine will then
shut down automatically.
8. During drying, the timer and temperature are displayed alternately on the screen
every 3 seconds.
9. When the machine is running, you cannot change the time and temperature. If a
change is required, press power to stop the drying and then restart the process.
Note: Avoid opening the glass door too often during the drying process.