Enviracaire ECM-250i Manual Del Usuario página 10

035-02425-000_R0 ECM-250i EFS
TROUBLE SHOOTING
Q: I hear the fan turning, but I don't see any mist. Is my humidifier operating
properly?
A: Dry air is pulled through the system and a fan disperses invisible, moisture
balanced air. There is no "mist" emitted. When operating normally you will feel
only cool air coming from the unit. Monitor the water level in your Tank/ Base. If
you notice a decrease in the Water Tank over 24 hours then the unit is operating
normally.
Q: My unit has been running for several hours. I hear the fan spinning, but I do not
notice the water level in the tank decreasing.
A: First, check the filter to ensure it is wet. If the pad appears dry, remove it from
the Base and gently rinse under cool water. Reposition wet filter in the Base.
You may also want to note the current moisture level in your home. If the
humidity level is over 60% the unit will not put out much moisture as your air is
already saturated.
Q: The humidifier is not running (the fan is not even spinning), but all (or some) of
the lights are on.
A: If the Desired Humidity light is ON: The Advanced Mist
set too low. Moving the knob clockwise
Q: The Advanced Mist
humidifier never seems to turn back on. Is something wrong?
A: The Humidistat knob may be set too low. Moving the Humidistat knob to the end
clockwise
Q: The Advanced Mist
humidifier never seems to turn off. Is something wrong?
A: The Humidistat knob may be set too high. Reset the Advanced Mist
knob following the instructions under FEATURES.
Q: My filter has turned light brown and rust colored. Do I need a new filter?
A: Probably not. Since your filter has been made with ProTec
change in color indicates only a mineral deposit. Soak filter in a sink full of cool
water to help break up deposits. The discoloration may remain but will not affect
the humidifier's performance.
8/22/03 1:33 PM
™ Humidistat knob was set according to the manual, but the
should restart the unit.
™ Humidistat knob was set according to the manual, but the
Page 10
TROUBLE SHOOTING
™
Humidistat knob may be
to the end should restart the unit.
™
Humidistat
antimicrobial the
™