Power On/Off Main Unit; Enter Main Menu - Multilaser P3212 Manual Del Usuario

1. In power-off mode, press the encoder to start the unit:
2.
In power-on mode, press the middle of encoder to mute the unit and press it for longer time to
power off the unit.
3. In any mode, turn the encoder right to increase the volume and turn it left to decrease the volume.
4.
In any mode, press "MENU" key to return to the main interface.
5.
In any mode (except the main interface), press "NAVI" key to enter/exit navigation mode.
6. SD slot. In any mode, insert the SD card to automatically turn to the interface to read SD card.
7.
USB port. In any mode, insert USB to automatically turn to the interface to read USB.
8. GPS slot. All the map software loaded in SD card will be accessed through this port.

3.3 Power on/off main unit

• I f the unit was powered off by pulling out the key last time, insert the key again to automatically
enter power-on state for main unit.
• I f the unit was powered off by pressing the power supply key on the panel last time, you can gently
press any key to power on the unit again.
• W hen the system identifies power-off after pulling out the key, it will automatically activate power-
-off operation.
• L ong press the power supply key and the system will automatically activate power-off operation.

3.4 Enter main menu

• A fter the unit is powered on, the system will enter default radio state. If you want to enter the main
3. Basic operation
35