Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Connect the electric cord to the outlet on the wall
and turn on the hydro filter, only by pushing the
"ON/OFF" switch.
When turning off the appliance, the motor unit must
be removed from the water basin until it is used
again.
To empty the water basin:
1. Unfasten the two latches and remove the motor.
2. Lift the basin holding it from the vacuum intake
.
and empty the water through the other side.
3. Empty the heavier particles that are in the
.
bottom of the container in a trash can (such as wet
.
lint).
10
4. Wash, rinse and dry well the basin.
5. Keep the motor separate from the basin until the
next time it is used.
Dismount the turbine after each use and wash it
inside and outside with soap and water, using the
brush provided for that purpose.
Dry it and place it again in its position.
Fasten the bolt without forcing it, until adjusting
correctly the flat border of the turbine.
WARNING: The turbine must always be installed after cleaning it.
Do not use the appliance without the turbine.
Capítulos
Tabla de contenido
