JVC RC-EX20S Manual De Instrucciones página 20

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Synchronized recording with CD playback
You can make the CD player to start playback when the tape deck enters the recording mode.
1 Load a cassette.
Use only a type-I normal tape.
2 Load a CD.
3 Press CD/RANDOM to enter CD mode.
4 Specify a track or point on the disc to start
recording.
• To start recording from the desired track, select the
track by pressing 4 or ¢ in stop mode.
• To start recording from the desired point on a disc,
play the disc and pause at the desired point by
pressing PLAY/PAUSE 3/8.
5 Press REC ¶.
PLAY 2 is also depressed, and synchronized
recording starts.
• The CD SYNC indicator appears in the display
window during synchronized recording.
Erasing
When recording on a pre-recorded tape, the previous
recording is erased and only the new recording is heard
next time the tape is played back.
17
3
1
5
2
4
PUSH
DISPLAY
When the tape reaches the end first, the CD player enters
the pause mode. Press PLAY/PAUSE 3/8 to continue
playback, or press STOP 7 to stop playback.
When the CD player stops first, the tape continues
running. In this case, press STOP/EJECT § to stop
the tape.
To erase a tape without making a new
recording
1 Press TAPE on the unit to enter the tape mode.
2 Press REC ¶.

Capítulos

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Rc-ex20aRc-ex20bRc-ex30bj

Tabla de contenido