Presetting Stations; Tuning In A Preset Station - JVC RC-EX20S Manual De Instrucciones

Presetting stations

You can preset 10 FM and 10 AM stations.
There is a time limit in doing the following steps. If the
setting is canceled before you finish, start from step 3
again.
Note:
In some cases, test frequencies have been already
memorized for the tuner since the factory examined the
tuner preset function before shipment. This is not a
malfunction. You can preset the stations you want into
memory by following the presetting method.
1 Press BAND/TUNER to select the band, FM or
AM.
2 Press 4 or ¢ to tune in the station you want to
preset.
3 Press PROGRAM/CLOCK SET.
The PROG indicator starts blinking in the display
window.
TUNER
PROG
FM
4 Press PRESET + / CD REPEAT or PRESET – to
select the preset number.
TUNER
PROG
FM
Preset number
13
1 4,6
PUSH
DISPLAY
5 Press PROGRAM/CLOCK SET.
The tuned station in step 2 is stored in the preset
number selected in step 4.
Storing a new station on a used number erases the
previously stored one.
6 Repeat steps 2 to 5 to preset other stations, using
different preset numbers.

Tuning in a preset station

1 Press BAND/TUNER to select the band, FM or
AM.
2 Press PRESET + / CD REPEAT or PRESET –
repeatedly until the desired preset number
appears.
Note:
If you unplug the AC power cord or if a power failure
occurs, the preset stations will be erased in a few days. If
this happens, preset the stations again.
MHz
MHz
2,6 3,5,6