Call Features - Velleman INTERCOMBT Manual Del Usuario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

Note:
The INTERCOMBT switches to standby mode automatically if it cannot
pair with any device within 2 minutes.
The INTERCOMBT powers itself off if it is not connected with any device
within 10 minutes.
The INTERCOMBT can connect with two devices simultaneously; either
two mobile phones or a mobile phone and an intercom. You can connect
the INTERCOMBT with the other Bluetooth device when the INTERCOMBT
is in standby or intercom status.
Once paired and connected with two Bluetooth devices, the INTERCOMBT
automatically connects to the two devices whenever you turn the
INTERCOMBT on, provided that the INTERCOMBT is within range.
Most problems are caused by improper pairing between the headset and
the Bluetooth device. Please follow the instructions step by step.
10. Intercom Features
When two INTERCOMBT headsets are connected, you can use the intercom
features.
Send out and intercom call: Press and hold the + [5] or the – button [1]
for about 2 seconds and release it when you hear a short tone.
Note: When the INTERCOMBT is connected with another intercom and a
mobile phone at the same time, you cannot send out an intercom call
during a phone call.
Cancel an intercom call: Briefly press the middle button [3] when
sending out an intercom call. You hear a short tone.
Answer an intercom call: Briefly press the middle button [3]. You hear a
short tone.
End an intercom call: Briefly press the middle button [3]. You hear a
short tone.
Reject an intercom call: Press and hold the middle button [3] for about
2 seconds when receiving an intercom call.
Volume up: Press the + button [5]. You hear a tone when the maximum
volume is reached.
Volume down: Press the – button [1]. You hear a tone when the
minimum volume is reached.

11. Call Features

When the INTERCOMBT is connected with a Bluetooth mobile phone, you
can make phone calls.
Answer a call: Briefly press the middle button [3].
End a call: Briefly press the middle button [3].
Reject a call: Press and hold the middle button [3] for 2 seconds.
V. 01 – 29/06/2012
INTERCOMBT
7
©Velleman nv
Tabla de contenido
loading

Tabla de contenido