Setting The Limits; Performing Settings - testo 623 Manual De Instrucciones

Pos : 27 /TD/Produkt verw enden/testo623/testo 623 Grenzw erte ei nstellen @ 4\m od_1254828443945_79.doc @ 51445 @ 255
6.2.

Setting the limits

Temperature
When changing the temperature unit from °C to °F, the set limit
values are converted
Humidity
When changing the humidity unit (%, td, wb), the set limit values
are not converted. The limit values must be reset via the Setup
menu.
Pos : 28 /TD/Produkt verw enden/testo623/testo 623 Einstell ung en vor nehm en neu @ 4\mod_1248956306675_79.doc @ 46623 @ 2
3.
6.3.

Performing settings

1. Press and hold
> Display flashes.
2. Select the required function with [Set].
> The adjustable parameter flashes.
3 Set values with
settings, see following table).
- Instrument changes to the next display function
[Set] for 2 s.
◄
[ ]
To scroll rapidly forward and back, press and hold
►
].
[Esc]
Press to cancel settings without saving them.
[Set]
Hold down for 2 s to save previously set values and
return to the current reading display.
If the entire Setup menu is run through, the settings made
are automatically stored.
If no key is pressed within 30 s, the screen reverts to the
current reading display automatically. No settings are
saved.
►
or [ ] and confirm entry with
6 Using the product
[Set] (for
◄
[ or
29