monolith CLASSIC Manual De Usuario página 35

12 ASSEMBLING THE MONOLITH EXCL. CART
A. Remove the three ceramic feet from the carton and
place them in a triangular shape on the desired location
(for example the MONOLITH table). Making sure that
the spacing between the ceramic feet is equal and has
the same diameter as the base of the ceramic unit. The
flat sides of the ceramic feet should face inwards.
CAUTION: Only place a flat and stable surface. Keep in
mind the heavy weight of the grill. Note that the grill can
reach very high temperatures and should not be placed
in the immediate vicinity of combustible materials. The
grill must not be operated in closed rooms.
B. Lower the ceramic unit on to the three ceramic feet.
making sure the ash compartment opening is between
the front two ceramic feet. Check that the ceramic feet
are placed an equal distance apart and that the flat
sides are facing inwards. We suggest carrying the
Monolith by the hinges and the air vent opening.
CAUTION: Due to the risk of breakage please exercise
caution when handling the ceramic components. Avoid
carrying the grill by the bamboo handle, this can lead to
damaging the grill! Due to the weight we recommend the
unit be carried by two people. Be sure to wear gloves to
prevent injuries.
C. LE CHEF ONLY: Loosen the two capped nuts on the
front of the metal bands, attach the handle to the bolt.
Screw the capped nuts back on the studs and tighten
with a wrench.
D. Place the cast iron cap on the top opening of the
ceramic unit.
E. Put the fire box inside the MONOLITH; placing the cut
away section towards the opening of the ash compart-
ment. Cleaning your MONOLITH is easy when the fire box
and the ash compartment door opening are aligned
correctly.
F. Place the fire ring on top of the fire box, making sure
the opening for the wood chips is directly behind the
corresponding opening in the ceramic unit.
G. Place the cast iron charcoal grid on the fire box. The
cast iron charcoal grid prevents the base of the ceramic
unit from getting to hot.
H. Place the protector stone on the base of the unit. The
protector stone prevents the base of the grill from over-
heating.
I. First place the Cast Iron Fire Grate inside the Firebox
and then the Charcoal Basket inside the Firebox, making
sure that the opening for the Smoke Chip Feeder System
is aligned with the opening in the Firering.
IMPORTANT: Before first use check that all the screws
are safely and correctly tightened. The screws on the
metal bands around the unit should be tightened regu-
larly.