Radio Operation - Daewoo DCP-29 Manual De Instrucciones

Alarm Time Se ng
- In Clock Display Mode
- Press AL1/AL2 bu on to enter the Alarm Time Se ng Mode.
- Press AL1/AL2 once again to select the alarm sound source.
The sequence: Off > Radio > Buzzer
- Press the SET bu on to enter the Alarm Time
The Se ng sequence for wake up by Radio: Minutes > Hour > Preset radio sta on
number > Volume (Radio preset sta on must be set before using this func on.
Otherwise, alarm will only wake up to the default sta on at FM 87.5MHz)
The Se ng sequence for wake up by Buzzer: Minutes > Hour
- Press the MODE bu on any me return to Clock Display Mode.
- Alarm last for 1 hour
- Alarm only available to stop by pressing the related alarm bu on (AL1/AL2)
- Alarm restart every 9 minutes a er each press of SNOOZE

RADIO OPERATION

- Press MODE bu on to enter Radio Mode
* default at FM87.5 when fi rst use
* Last radio frequency memory
- Press SCAN-/SCAN+ once for radio frequency selec on. Press & hold for auto
radio sta on searching.
- Once the radio sta on been selected. Press & hold MEMO bu on to enter the
Preset Radio Sta on Mode. Then press SCAN-/SCAN+ to select the desire preset
sta on number. Then press MEMO again to confi rm.
- Repeat the above procedures to store more radio sta ons (maximum 10 preset
radio sta ons).
Listening to the radio by preset sta on
- In Radio Mode, press the MEMO bu on to select the desired preset radio sta on.
Then press MEMO bu on again for the next preset sta on.
SNOOZE/LIGHT FUNCTION
- During the wakeup me, press the SNOOZE/LIGHT bu on once to temporarily
turn off the alarm. A er approximately 9 minutes the alarm will sound again. The
cycle will repeat when the SNOOZE / LIGHT bu on is pressed again. Alarm max
last for 1 hour
Note:
- When pressing the SNOOZE / LIGHT bu on, the panel backlight and projec on
clock will turn on, and will turn off automa cally a er 1 minute.
- Press and hold SNOOZE/LIGHT for backlight and projec on clock always ON, then
press and hold again for back to normal
PROJECTOR:
- Scroll the FOCUS for tuning the clear me projec on image
- Scroll the IMAGE ROTATING for tuning the best me projec on angle
GB