Usb Data Cable; Call - Nokia 7373 Manual Del Usuario

To start the synchronization from your phone, select
Connectivity > Data transfer
select Initializing syn-chronization
Synchronizing for the first time or after an interrupted synchronization may
take up to 30 minutes to complete.

USB data cable

You can use the USB data cable to transfer data between the phone and a compatible
PC or a printer supporting PictBridge. You can also use the USB data cable with
Nokia PC Suite.
To activate the phone for data transfer or image printing, connect the data cable.
Confirm USB data cable connected. Select mode.
Nokia mode — to use the cable for PC Suite
Printing & media — to use the phone with a PictBridge compatible printer or with
your compatible PC
Data storage — to connect to a PC that does not have Nokia software and use the
phone as a data storage device
To change the USB mode, select
cable > Nokia mode,

■ Call

Select Menu > Settings
Call forwarding — to forward your incoming calls (network service). You may
not be able to forward your calls if some call restriction functions are active.
See Call restrictions
Voice clarity > Active
noisy environments
Anykey answer > On
the power key, the camera key, the left and right selection keys, or the end key
Automatic redial >
after an unsuccessful call attempt
1-touch dialing > On
1-touch dialing keys 2 to 9 by pressing and holding the corresponding number key
Call waiting > Activate
while you have a call in progress (network service). See "Call waiting," p. 20.
> Server sync. Depending on the settings,
or Initializing
Menu
Printing & media, or
> Call and from the following options:
in "Security," p. 50.
— to enhance speech intelligibility especially in
— to answer an incoming call by briefly pressing any key, except
On — to make a maximum of 10 attempts to connect the call
— to dial the names and phone numbers assigned to the
— to have the network notify you of an incoming call
Menu
copy.
and select from the following options:
> Settings > Connectivity
Data storage.
S e t t i n g s
> Settings >
> USB data
47