Safety Instructions - Kathrein UFO 836 Manual De Instrucciones

Installation
Slide the UFO 836 into any available slot. If baseband data to be exchanged (for example
UFZ 896) with a different module, the UFO 836 which must be arranged right or left. Make
sure that the UFO 836 is fully inserted and that the contact is made to the backplane (the
front plate of the UFO 836 is located on the front of the base unit). Fix the two thumb-
screws up and down (Torx screws). The UFO 836 is automatically recognised by the UFX
800. When the UFO 836 reaches the proper operating condition, the green LED lights up.
All other operating instructions, refer to the manual in the USW 800 operating software.

Safety instructions

WARNING
In the case of a fault, it may happen that the heatsink UFO 836 reach
temperatures of over 70°C. In this case, the system normally switches off
automatically. When handling the system under such conditions please use
the appropriate care.
When using UFOcompact plus in publicly accessible spaces, the front cover of the system
must be closed.
Operation
The operation of the UFO 836 is via the graphical user interface and the control software
USW 800; online help describes the confi guration of all modules, including the UFOcom-
pact plus module UFO 836. All other setting instructions, refer to the manual/online help of
®
the USW 800.
Note: The up to date version of the USW 800 and its instructions are available free to
download on the Kathrein website "www.kathrein.de".
Waste/Recycling note
Electronic equipment is not domestic waste - it must be disposed of properly in
accordance with directive 2002/96/EC OF THE EUROPEAN PARLIAMENT AND THE
COUNCIL dated 27th January 2003 concerning used electrical and electronic appli-
ances. At the end of its service life, take this device for disposal at a designated public
collection point.
Internet: www.kathrein.de
KATHREIN-Werke KG • Anton-Kathrein-Straße 1-3 • P.O. Box 10 04 44 • 83004 Rosenheim • GERMANY • Phone +49 8031 184-0 • Fax +49 8031 184-306
HOT SURFACE
936.4700/-/VMWI/0614/EN - Technical details subject to change!
DO NOT TOUCH