2. Daylight synchro Photography
When photographing a subject in the shade, or against the sun or bright
window, the flash can be used.
After making sure the green LED is lit, push the daylight synchro switch in
the direction of arrow and hold it in place, then release the shutter.(Fig. G)
The daylight synchro switch is automatically returned to its original-position
after use.
3. Prefocusing
When composing a picture where a principal subject is not in the center of the
viewfinder, it is necessary to prefocus the camera lens. To do so:
(1) Look through the viewfinder and compose the picture so that your subject is
located directly behind the focusing frame. (Fig. H)
(2) Gently press the shutter release button halfway and maintain gentle pressure
to lock in the correct focus.
(3) While maintaining pressure on the shutter release button, recompose the
picture as you desire and then press the shutter release button all the way
down to take the photograph. (Fig. I) (The prefocus can be cancelled simply
by removing pressure from the shutter release button.)