Warranty And Limitations Of Liability - Beem THERMO 2 GO & GRIND Manual De Instrucciones

27
Problem
The coffee does not
taste very good.
The device switches
off during the
brewing process.
A large amount of
steam is produced in
the brewing process.
During use, an
unpleasant smell is
detected.
The device does not
start the brewing
process at the set
timer time.

Warranty and Limitations of Liability

The warranty excludes any defects caused by improper use, calcifi cation, damage or repair
attempts. The same applies to normal wear and tear.
We do not accept any liability for damage or consequential damage resulting from:
• Failure to follow the operating instructions
• Non-designated use
• Improper or unsuitable handling
•
Repairs which are not carried out properly
•
Unauthorised modifi cations
•
Use of outside parts or spare parts
08769_DE-EN-FR-ES-IT_A5_V3.indb 27 08769_DE-EN-FR-ES-IT_A5_V3.indb 27
Possible cause
There is not enough coffee pow-
der in the permanent fi lter (4).
The device needs to be cleaned.
The coffee/water mixture is not
ideal.
The water quality is not good.
There is no longer any water in
the water tank.
The device is furred up.
The device is being used for the
fi rst time.
The device has previously been
descaled.
The power supply has been cut
in between times.
Fix
Pour the quantity of coffee re-
quired into the permanent fi lter
(see the "Preparation" chapter).
Clean the device (see the
"Cleaning and Care" chapter).
Adjust the mixture to your own
individual taste.
Check the water quality and fi lter
the water if necessary.
Pour water into the water
tank (see the "Handling and
Operation" chapter – "Filling the
Water Tank").
Descale the device (see the
"Cleaning and Care" chapter
– "Descaling").
A smell often develops when
new devices are fi rst used. The
smell should disappear once the
device has been used several
times.
Rinse out the device with clear
water.
As soon as the power supply is
cut, all settings (time, timer) are
cancelled.
13.01.2020 13:57:18 13.01.2020 13:57:18
EN