the trigger switch (14) on the handle pressed .
The POWER LED (10) lights up . Depending on
the position of the switch (17), the siren will
sound or the megaphone will operate in one
of the following operating modes when the
corresponding pushbutton [SPEECH, RECORD,
PLAY (9)] is engaged:
Switch
Operating mode
SPEECH
Direct announcements via the microphone
Recording via the microphone (20 seconds max.)
Speak into the microphone. The current
RECORD
recording will overwrite any recording made
previously.
To stop the recoding, disengage the button.
Replay of the recording
The LED REC (10) lights up.
PLAY
The replay will be continuously repeated.
To stop the replay, disengage the button.
To select a function, engage one of the three
buttons and disengage the other two buttons .
When speaking into the microphone (12), hold
the microphone opening (6) as close to your
mouth as possible . Either hold the microphone
in your hand or put it onto the hook on the rear
of the megaphone .
For reproductions and for direct announce
ments, adjust the volume on the side of the
microphone with the control VOLUME (8) . In
case of howling (feedback) during an announce
ment, turn back the control accordingly .
To save the batteries, switch off the megaphone
after use and between operations . Set the switch
(7) on the microphone to the position OFF and
release the trigger switch (14) on the handle .
5.1 Replay of MP3 files
Regardless of the other functions of the meg
aphone, the integrated audio player is able to
reproduce audio files in MP3 format . USB flash
drives or microSD[HC] cards can be used as stor
age media .
Note: Due to the large number of storage device manufactur
ers and device drivers, it cannot be guaranteed that all storage
media are compatible with the audio player .
Connect a USB flash drive to the USB port (1)
or / and insert a microSD[HC] card into the
All rights reserved by MONACOR
be reproduced in any form or by any means for any commercial use.
INTERNATIONAL GmbH & Co. KG. No part of this instruction manual may
®
slot (2), contacts to the USB port, until it en
gages . To remove the card, push the card into
the slot until it disengages .
Set the switch (17) to the position MP3 . When
the megaphone is switched on, the replay from
the storage medium most recently selected will
start . When a storage medium is connected
during operation, the replay will start from this
medium . The LED (4) keeps flashing during the
replay .
The control buttons (3, 5) of the MP3 module
have the following functions:
Button
Function
Pause the replay (and go to the beginning of the
current title when the button is kept pressed for a
while) or continue the replay
Go to the next title,
go to the last title of the current storage medium
when the button is kept pressed for a while
Go to the previous title,
go to the first title of the current storage medium
when the button is kept pressed for a while
Switch to repeat of individual titles or return to
RPT
repeat of all titles of the current storage medium
Increase / reduce the volume for
V+/−
replaying MP3 files
Select the other storage medium
M
(USB port memory card)
6 Specifications
Peak power of amplifier: � � 25 W
SPL: � � � � � � � � � � � � � � � � � 110 dB
Power supply: � � � � � � � � � � 8 × 1�5 V battery of size C
Dimensions: � � � � � � � � � � � ⌀ 230 mm × 340 mm
Weight: � � � � � � � � � � � � � � � 1�3 kg
Subject to technical modification .
or external power supply
⎓12 V/2 A
9