Operating Elements And Connections - Monacor TM-17 M Manual De Instrucciones

Megaphone with MP3 Player
These instructions are intended for users without
any specific technical knowledge . Please read
the instructions carefully prior to operation and
keep them for later reference . All operating ele­
ments and connections described can be found
on page 2 .
1 Features
TM­17M is a powerful megaphone with hand­
held microphone . It can be operated via batteries
or via external power supply (e . g . electrical sys­
tem of a car) and offers a peak power of 25 W .
The megaphone features a recording function
(recording time: 20 seconds max .) and a siren . It
is also equipped with a reproduction module for
MP3 audio files to be replayed from a USB flash
drive or a microSD card . It is provided with sep­
arate volume controls so that announcements
and MP3 reproductions can be mixed as desired .
2 Operating Elements
and Connections
1 USB port (type A) to connect a USB flash
drive to replay MP3 audio files
2 Slot for a microSD[HC] memory card to
replay MP3 audio files
3 Control buttons for replaying MP3 files
☞
(functions chapter 5 .1)
4 Status LED; keeps flashing while MP3 files
are being replayed
5 Button M to select the storage medium
(USB flash drive  memory card)
6 Microphone opening
7 On/off switch for the megaphone
8 Volume control for announcements via the
microphone and for reproducing a recording
on the microphone
9 Pushbuttons to select the operating mode
SPEECH: announcement
RECORD: recording
PLAY: replay
Engage the button for the desired operating
mode; disengage the other two buttons .
10 Status LEDs
POWER: power LED
REC: recording being reproduced
11 Latch of battery compartment
12 Hand­held microphone, attached to the
megaphone
13 Shoulder strap
14 Trigger switch, as an alternative to the slider
switch (7); keep pressed to switch on the
megaphone
15 Jack to connect an external power supply
(⎓12 V) via a low­voltage plug ⌀ 2 .1/ 5 .5 mm
(inside/outside), internal contact = ⊕
16 Cover of battery compartment
17 Switch for function selection (
☞
chapter 5)
7