Peak Limiter Section; Inputs And Outputs - Phonic PCL 2700 Manual Del Usuario

PEAK LIMITER SECTION

25
24
PCL2700
24. Peak Limiter Control
This control allows users to determine when the peak/ limiter
function will kick in ie. to what level the audio level will be limited.
Turning it all the way to the right will effectively disable the
limiter. if the limiter function is active on a signal for more than 20
milliseconds, the signal's gain will be reduced slightly to reduce
the risk of audible limiting. it's advisable, however, to reduce the
levels set by the limiter and output controls (in the compression
section) to ensure this limiter activates rarely, if at all.
25. Limit Indicator
This indicator will light up when the limiter
function is in use.
26. Power Button
Flicking this switch turns the PCL on and off.
27
PCL2700 / PCL4700
25
24
PCL4700
26
27

INPUTS AND OUTPUTS

27. AC Power Inlet and Fuse Holder
This inlet is used to connect the provided aC power cable, the
other end of which is connected to a suitable power source. Check
local voltage levels are compatible before attempting to use this
device. The power supply's fuse is imbedded in this socket. if for
some reason the fuse blows, please remove the fuse cover and
replace it with another suitable fuse.
28. Output Connectors
These balanced XLr and 1/4" outputs are used to send the main
output signal of the PCL to external devices.
29. Input Connectors
These XLr and 1/4" inputs accept balanced and unbalanced
signals, and feed them to the PCL's expander/ gate, compressor,
de-esser and limiter functions.
30. Operating Level Switch
This switch adjusts the PCL to different operating levels. if you
connect consumer-level (-10dB) equipment, this button should
be pushed in. if you are using professional gear (+4 dB), leave
it released.
31. Sidechain Send (PCL2700 only)
This balanced 1/4" output will allow users to route the signal to
other external devices. This signal can be processed and sent
back to the PCL through the sidechain return inputs.
32. Sidechain Return (PCL2700 only)
as described above, using the sidechain send will allow you to
send a signal to an external processing device, and return the
processed signal to the device through this balanced 1/4" input.
28 0 29
28 29
0 1 2