General Guidelines - Perel CFAN040PS Manual Del Usuario

3.

General Guidelines

Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.

Keep this device away from dust and extreme temperatures.

Protect this device from shocks and abuse. Avoid brute force when operating the device.

Familiarise yourself with the functions of the device before actually using it.

All modifications of the device are forbidden for safety reasons. Damage caused by user modifications
to the device is not covered by the warranty.

Only use the device for its intended purpose. Using the device in an unauthorised way will void the
warranty.

Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and
the dealer will not accept responsibility for any ensuing defects or problems.

Use the original packaging to transport and store the device.

Keep this manual for future reference.
4. Overview
Refer to the illustrations on page 2 of this manual.
1 grille mounting screw
2 front grille
3 fan blade mounting screw
4 fan blade
5
fan blade mounting nut
6
rear grille
7
motor shaft
8
motor housing
5. Assembly
Assemble the fan as follows:
1. Loosen the grille mounting nut from the motor housing.
2. Position the rear grille firmly to the motor housing. Fasten it with the mounting nut.
3. Push the fan blade along the motor shaft.
4. Hang the front grille on the rear grille using the grille clamp. Fix the grilles together with the clips on
the rim of the front grille. Fix with the screw and nut.
5. Mount the height adjustment ring onto the lower pole. Insert the upper pole into the lower pole and
tighten the height adjustment ring.
6. Fix the base onto the stand.
Your fan is now ready for use.
6. Operation
To use the fan:
1. Place the fan on a flat and sturdy surface. Make sure no objects (e.g. curtains) can be sucked into
the rear of the fan.
2. Insert the power plug into the mains.
3. Set the desired output speed using the speed buttons: 0 = stop; 1 = low; 2 = medium; 3 = high.
4. Push down the oscillation knob to make the fan oscillate. Pull up the oscillation knob to fix the fan's
direction.
5. To adjust the fan's height, hold the upper pole and loosen the height adjustment ring. Adjust the fan
to the required height and tighten the height adjustment ring.
6. Always switch off and unplug from the mains before moving the fan.
7. Switch off and unplug from the mains after use.
V. 01 – 18/10/2016
CFAN040PS
9 oscillation knob
10 speed buttons
11 body
12 locking knob
13
upper pole
14
height adjustment ring
15
lower pole
16
base
4 ©Velleman nv