BOJ SB-600 Manual De Uso página 4

English
Main parts:
1. Small jar
2. Blade
3. Motor base
4. Jar lid
5. Upper cover
6. Big jar
How to use
1. Put the motor base on flat & dry platform. Make sure the electricity power is the same as
instruction manual.
2. Wash the jar and make sure the jar is clean inside. Cut the fruit into the cube blocks with
15 x 15 x 15 mm (maximum size). Put these cube blocks into the jar and add proper water in it.
Then put the jar screwing clockwise in the blade holder. Note that the water amount should not
exceed the maximum capacity of the jar. Make sure that the connector under the blade holder
drives smoothly.
3. Plug in.
4. Place the blending jar on the motor body (with connector downside) and then turn the blending
jar clockwise into the motor base by aiming the arrow at the lock mark from the unlock mark.
After that, the blender starts working. If the blending jar and the motor unit are not locked, the
blender won't operate. This is a safety feature.
1
2
3
- 4 -
4
5
6
Check the connector can
drive smoothly.