Pattern Selector Dial; Stitch Length Dial; Stitch Width Dial - Janome 385.2049LX200 Manual De Instrucciones

Pattern Selector Dial
Raise the needle and presser foot. Turn the pateern selector
dial to set the setting mark at the symbol corresponding to the
desired pattern.
0_ Setting mark
A
K
I
Stitch Length
Dial
Turn the stitch length dial to set the setting mark at the desired
stitch length.
The higher the number, the longer the stitch length
0_ Setting mark
• "_ "is the recommended setting for buttonhole stitching.
• Adjust the dial in the 0.5-4 range when you sew the zigzag
stitch.
• Set the dial at "S.S." to sew the stretch stitch pattern sewing.
• If the stretch stitch pattern is not uneven, turn the stitch
length dial in the direction of "-" to compress it, or "+" to
expand it.
4
I
0 I
I
I
4-
2
S.S.
Stitch width dial
Turn the stitch width dial to set the setting mark at the
desired stitch width.
The higher the number, the wider the stitch width
d_ Setting mark
Note :
Raise the needle above the fabric, when you turn the stitch
wdth da.
_0 2345_
28