Decrease In Suction Strength; Corrective Action - Cyclo Vac Schematic GS115 Manual De Instrucciones

Troubleshooting
PROBLEM
Decrease in suction
strength
28
POSSIBLE CAUSE
Dirt recipient/Bag is full
Dirt recipient is not
properly attached
Filters need cleaning /
replacing
Motor guard screen is
blocked
Open vacuum inlet
Exhaust line is clogged
Troubleshooting

CORRECTIVE ACTION

Empty dirt recipient /
change bag (see pages
22 to 25).
Check clamps and dirt
recipient are aligned.
Remove, shake and/or
wash filters or replace
them (depending on
model) before reinstalling
them in the unit (see
pages 22 to 25).
Remove filters, and
check the guard screen
(which separates the
motor from the filtration
compartment) for
blockage. Make sure
filters are always properly
installed, to prevent this
problem from happening
again.
Close all vacuum inlets
not in use.
Verify that no object is
blocking the exhaust.