Cup's Lid; Stainless Steel Blade For Puree/Grinding; Water Container; Water Container's Lid - Oursson BL1060HGD Manual De Instrucciones

ELEMENTS OF DESIGN, Fig. B

Cup's lid

Stainless steel blade for puree/grinding

Water container

Water container's lid

Glass cup

Steamer's lid

Steamer

Drive shaft

Body

Control panel
Display
UTILIZATION, Fig. C
Control panel, Fig. C-1
- use these buttons to select cooking mode
and to set cooking time.
- use the button to set STEAMER mode, to
steam cook.
- use the button to set STEAMER + BLENDER
mode, steam cooking with automatic grinding for
30 sec. at the end of cooking.
«Steam+Puree» preset time 5 min.
- use the button to start cooking.

- use the button to stop/finish the cooking process.

- use the button for grinding mode, BLENDER.
DISPLAY, Fig. C-2
1. Program's number indication.
2. Cooking time/countdown
Before first use, make a test steam cooking without
ingredients; add water into the water container. After
that wipe the body with a damp soft cloth. Wash
the cup, cup's lid, blade with a warm water with a
dishwasher detergent.
Before assembling and disassembling the de-
vice, unplug it.
The blades are very sharp, be careful.
MODES
Use the customized control, when the preset modes do not suit you.
Mode Description
1. Plug in the device.
2. Press
and cooking time 5 min. By pressing the button several
times, you will cycle the cooking time, from 5 to 30 minutes/
Steamer +
one press 5 minutes. Use  buttons to change the
Blender
cooking time by 1 minute.
3. Press
4. Press
semble the device.
5. Turn the cup to
6. Remove the cup from the body. Now you can open the cup.
12
Display indication
button once, display will show «Steam+Puree»
button to start cooking.

button and unplug the device. Now you can disas-

mark to unlock it.
Operation:
1. Flip the glass cup without lid, place from the other
side into the cup the drive shaft, turn it counter-
clockwise and lock it at base of the glass cup.
Make sure that the drive shaft is firmly installed at
the base of the glass cup and is freely turning left/
right. Flip the cup bottom down.
2. Place the glass cup with drive shaft onto the body
of the device, aligning the position of the handle
with the button on the control panel. Make sure

that the cup is firmly installed.
3. Hold the cup's handle and turn it clockwise into
the lock position, aligning
the cup's base), till you hear a click.
4. Hold the plastic console and set the blade for pu-
ree/grinding into the center of the cup.
5. Add ingredients into the cup.
6. Place the lid onto the cup, aligning the cup's spout
with the visor on the lid. Lock the lid by turning it
counter-clockwise.
7. Remove the water container and fill it with neces-
sary amount of water. Place the container back
onto the body of the device.
8. Plug in the device.
The device is equipped with an overheat pro-
tection. If there isn't enough water in the con-
tainer, the device will turn off automatically. You
will hear many sound signals. The display will
show - ... Add necessary amount of water into
the container to continue cooking.
NOTE:
Before adding water, let the device to cool. To pre-
vent the formation of scale in the steam chamber it
is recommended to use filtered water. Periodically
wash the chamber with lemon juice, then with run-
ning water. Wipe the inner surface of the chamber
with a dry cloth after each use.
Note
When steam cooking, condensa-
tion forms in the glass cup. You
can remove condensation before
grinding. Press
the device. Remove the glass
cup and pour the water through
the spout. Install the cup on its
place. Press
cooking.
To stop or cancel the operation,
press
operation press
with  (symbol on
button to stop

button to continue

button, to continue the

button.
