Beta 682/60 Manual De Uso E Instrucciones página 27

OPERATION MANUAL AND INSTRUCTIONS
Environment
Electromagnetic Compatibility
(EMC) Directive
Low voltage directive
Mechanical overload
Dimensions
Weight
(Transducer with display)
Due to continuous improvement all specifications are subject to change without prior notice.
DYNATESTER CALIBRATION
Your Dynatester has been supplied with a certificate of calibration. To maintain the specified accuracy
it is recommended that the Dynatester is recalibrated at least once per year.
CLEANING
Do not use abrasives or solvent based cleaners.
DISPOSAL
The crossed-out wheelie bin symbol on the equipment or packaging means that the product should be
collected separately from other types of urban waste at the end of its useful life.
Any user who is going to dispose of this tool can:
• deliver it to an appropriate collection facility for electronic or electrotechnical equipment;
• return it to the dealer upon purchase of a new, equivalent item of equipment;
• in case of a product for professional use only, contact the manufacturer which will arrange for the product
to be properly disposed of.
Proper disposal of this product allows the raw materials contained in it to be reused and prevents damage
to the environment or human health.
Illegal disposal of this product is a violation of the provision concerning the disposal of hazardous waste
and will give way to the application of such fines as provided for under current regulations.
IP 40. Indoor use within a light industrial
environment.
In conformance with EN 61326 : 1997
In conformance with EN 61010-1 : 2001.
To environmental conditions Pollution Degree 2
& Installation Category (Over voltage Category)
II.
150% of marked transducer capacity.
Transducer 106 (H) x 106 (W) x 185 (D).
Display 128 (H) x 185 (W) x 102 (D).
Dynatester 682/60 = 6.3 kg (13.9 lb).
Dynatester 682/400 = 6.4 kg (13.12 lb).
Dynatester 682/1500 = 7.3 kg (15.11 lb).
EN
27